|
|
Rules and Guidelines
for Admission to 4-year B. Tech.
in Jute & Fibre Technology
a)
Qualification : Applicants should be Indian nationals, and have
passed/appeared/or will appear on the year of admission at the 10+2 Higher
Secondary Examination of the West Bengal Board of Secondary Education or
equivalent examination of a recognised University or of a Board with
Physics, Chemistry, Mathematics, English and any other fifth subject or any
other qualification recognized by the University of Calcutta.
b)
Age : Candidates must not be over 21 years of age on the lst of
August of the year of admission (relaxations upto Three years for Scheduled
Caste/Scheduled Tribe candidates).
c)
Eligibility : Candidates shall be required to appear in a written test
conducted by the West Bengal Board of Examination for Admission to
Engineering, Medical and Technological Degree Colleges in Physics,
Chemistry, Mathematics (each paper of 3 hours duration) Candidate who reach
qualifying standard at the written test will be offered admission by the
Central Selection Committee in order of merit, subject to medical fitness.
d)
Application : Application for admission should be made in the prescribed
form of the Institute available during counseling by Central Selection
Committee. No application will be accepted by the Institute unless it bears
the JEE ENROLMENT and REGISTRATION NUMBER allotted by the Central Selection
Committee for Admission to Engineering and Technological Degree Colleges of
West Bengal. Applicants are requested to look in to newspaper notification
issued by Joint Entrance Board, Govt. of W.B. forms are distributed in the
month of December (tentatively) an qualifying examination are held in the
month of April.
e)
Admission : The Selected candidates will have to pay their fees on the
dates mentioned in the admission letter. A total sum of about
Rs. 10,500/- towards the fees for the first year has to be paid
at the time of admission. The Governing Council of the Institute
may change the fees from time to time, Students are required
to provide themselves with necessary instruments for engineering
drawing, books, yarns, cloths, etc. required in their practical
classes and project work.
Attention
to the students of 2005-2006 for the admission
details |
| 1. Branch wise intake through JEE |
30 (thirty) for B.tech in
Jute & Fiber Technology. Additional 5 seats for Foreign
Students and additional 3 seats through lateral entry. |
| 2. Reservation of seats for SC/ST/PH/DQ candidates |
As per West Bengal Govt. rules. |
| 3. Annual Charges(without hostel fees) |
Rs.10,500/- per year (Rupees ten thousand
and five hundred only) |
| 4. Initial deposit at the time of admission |
Rs.10,500/- per year (Rupees ten thousand
and five hundred only) |
| 5. Prospectus and admission form |
Rs.100 (Rupees one hundred only) |
| 6. Availability of hostel facilities |
Not Available |
| 7. Hostel charges per month |
Not Available |
| 8. Documents as required at the time of
admission |
i) Madhyamik Admit card
ii) JEE Admit card
iii) Madhyamik & HS mark sheets
iv) Medical Certificate(including eye testing)
v) Character certificate from the Head of school/college
last attended.
vi) Cast certificate for SC/ST candidates
vii) 3pp size photographs (colour)
viii) Transfer certificate (if already admitted to other
college) |
|
|
|
|
Schedule
of Syllabus
B. Tech. in Jute and Fibre Technology
1st Year
|
|
Theoretical
Papers
|
Full Marks
|
|
Paper : I
(Course No. 101)
|
Mathematics
1st half : Mathematics I -
50
2nd half : Mathematics II - 50 |
100
|
|
Paper : II (Course No. 102)
|
Physics :
1st half : Physics I - 50
2nd half: Physics II
-
50 |
100
|
|
Paper : III (Course No. 103)
|
Chemistry :
1st half : Organic, Polymer & Industrial
Chemistry - 50
2nd half : Inorganic, Physical & Analytical Chemistry
- 50 |
100
|
|
Paper : IV (Course No. 104)
|
Elements of Mechanical & Electrical Engineering :
1st half : Applied Mechanics - 50
2nd half : Electrical Engineering - 50 |
100
|
|
Paper : V (Course No. 105)
|
Industrial Accounting and Economics :
1st half : Accountancy and Costing - 50 2nd half : Elements of Economics -
50 |
100
|
|
Paper : VI (Course No. 106)
|
Computer and Communication skill :
1st half : Introduction
to Computer and
Programming - 50
2nd half : Communication skill - 50 |
100
|
|
Paper : VII (Course No. 107)
|
Introduction to Jute and other textile Fibres
|
100
|
|
Subtotal
(Theoretical)
|
700
|
|
Practical Papers
|
|
Paper : I (Course No. 151)
|
Physics Practical
|
100
|
|
Paper : II (Course No. 152)
|
Chemistry Practical
|
100
|
|
Paper : III (Course No. 153)
|
Engineering Laboratory Practice
a) Workshop - 50
b) Electrical Engg. - 50
|
100
|
|
Paper : IV (Course No. 154)
|
Computer Programming - I
|
100
|
|
Paper : V (Course No. 155)
|
Engineering Drawing
|
100
|
|
Subtotal
(Practical)
|
500
|
|
TOTAL
|
1200
|
|
|
2nd Year
|
|
Theoretical
Papers
|
Full Marks
|
|
Paper : I
(Course No. 201)
|
Engineering
Mathematics & Statistics :
1st half : Mathematics III
- 50
2nd half : Statistics - 50 |
100
|
|
Paper : II (Course No. 202)
|
Mechanical Engineering :
1st half : Mechanical Engineering - 50
2nd half : Mechanics of solids and fluids - 50 |
100
|
|
Paper : III (Course No. 203)
|
Textile Physics and Fabric Design & Analysis:
1st half : Textile Physics & Testing I - 50 2nd half : Fabric Design &
Analysis - 50 |
100
|
|
Paper : IV (Course No. 204)
|
Man-made Fibres and Textile Chemical Processing:
1st half : Chemistry & Technology of Man-
made Fibres - 50
2nd half : Textile Chemical Processing - 50 (Preparatory Processes) |
100
|
|
Paper : V (Course No. 205)
|
Thermal Engineering & Electronics
1st half : Thermal Engineering - 50
2nd half : Electronics & Microprocessor- 50
|
100
|
|
Paper : VI (Course No. 206)
|
Yarn Manufacture I:
1st half : Preparatory to Spinning I - 50
2nd half : Preparatory to Spinning II - 50
|
100
|
|
Paper : VII (Course No. 207)
|
Fabric Manufacture I :
1st half : Preparatory to Weaving - 50
2nd half : Weaving Mechanism I - 50
|
100
|
|
Subtotal
(Theoretical)
|
700
|
|
Practical Papers
|
|
Paper : I (Course No. 251)
|
Physical Testing of Fibres
|
100
|
|
Paper : II (Course No. 252)
|
Textile Chemical Processing Practical I
|
100
|
|
Paper : III (Course No. 253)
|
Mechanical Engineering Laboratory Practice
|
100
|
|
Paper : IV (Course No. 254)
|
Electrical and Electronics Laboratory Practice
|
100
|
|
Paper : IV (Course No. 255)
|
Yarn Manufacture Practical I
|
100
|
|
Paper : V (Course No. 256)
|
Fabric Manufacture Practical I
|
100
|
|
Subtotal
(Practical)
|
500
|
|
TOTAL
|
1200
|
|
|
3rd Year
|
|
Theoretical
Papers
|
Full Marks
|
|
Paper : I
(Course No. 301)
|
Yarn Manufacture
II
|
100
|
|
Paper : II (Course No. 302)
|
Fabric Manufacture II:
1st half : Weaving Mechanism II - 50
2nd half: Post Weaving Processes and Fabric Design - 50
|
100
|
|
Paper : III (Course No. 303)
|
Textile Chemical Processing II :
1st half : Chemistry & Technology of Dyeing - 50
2nd half : Chemistry & Technology of Printing - 50
|
100
|
|
Paper : IV (Course No. 304)
|
Textile Physics and Industrial Textiles:
1st half : Textile Physics and Testing II - 50 2nd half : Industrial and
Technical Textiles - 50
|
100
|
|
Paper : V (Course No. 305)
|
Maintenance and Process Control for Jute Industry :
1st half : Mechanics & Maintenance of Jute Machinery - 50
2nd half : Process Control & Utility Conservation in Jute Industry - 50
|
100
|
|
Paper : VI (Course No. 306)
|
Management, Mill Planning & Organisation : 1st half :
Management Concept and Techniques - 50
2nd half : Mill Planning, Organisation and Costing- 50
|
100
|
|
Paper : VII (Course No. 307)
|
Quality Management and Numerical Methods : 1st half :
Quality Management - 50
2nd half : Numerical Methods and Computation - 50
|
100
|
|
Subtotal
(Theoretical)
|
700
|
|
Practical Papers
|
|
Paper : I (Course No. 351)
|
Yarn Manufacture Practical II
|
100
|
|
Paper : II (Course No. 352)
|
Fabric Manufacture Practical II
|
100
|
|
Paper : III (Course No. 353)
|
Textile Chemical Processing Practical II
|
100
|
|
Paper : IV (Course No. 354)
|
Testing of Yarns and Fabrics
|
100
|
|
Paper : IV (Course No. 355)
|
Computer Programming II
|
100
|
|
Paper : V (Course No. 356)
|
Mill Training and Viva-Voce
|
100
|
|
Subtotal
(Practical)
|
500
|
|
TOTAL
|
1200
|
|
|
4th Year
|
|
Theoretical
Papers
|
Full Marks
|
|
Paper : I
(Course No. 401)
|
Advanced
Mechanical Processing of Jute and Other Fibres :
1st half : Yarn Manufacture III - 50
2nd half : Fabric Manufacture III - 50 |
100
|
|
Paper : II (Course No. 402)
|
Textile Science :
1st half : Textile Physics & Testing III - 50 2nd half: Textile
Chemical Processing III - 50 (Finishing & Allied Processes) |
100
|
|
Paper : III (Course No. 403)
|
Engineering Design of Textile Products and Instrumentation :
1st half : Engineering Design of Yarn and Fabric - 50
2nd half : Instrumentation and Control Systems - 50 |
100
|
|
Paper : IV (Course No. 404)
|
Environmental and Industrial Engineering:
1st half : Environmental Awareness, Plant Safety and Maintenance - 50
2nd half : Industrial Engineering - 50 |
100
|
|
Paper : V (Course No. 405)
|
Elective Special Paper :
a) Advanced Fibre Science and Production of Man-made Fibres
b) Yarn Forming Technologies of Staple Fibres c) Fabric Forming Technology
d) Advances in Chemical Processing of Textiles
e) Industrial Management and Operation Research |
100
|
|
Subtotal
(Theoretical)
|
500
|
|
Practical Papers
|
|
Paper : I (Course No. 451)
|
Yarn Manufacture Practical III
|
100
|
|
Paper : II (Course No. 452)
|
Fabric Manufacture Practical III
|
100
|
|
Paper : III (Course No. 453)
|
Textile Chemical Processing Practical III
|
100
|
|
Paper : IV (Course No. 454)
|
Textile Physics & Testing Practical
|
50
|
|
Paper : IV (Course No. 455)
|
Project Work
|
150
|
|
Paper : V (Course No. 456)
|
Mill Training, Viva-Voce & Seminar
|
100
|
|
Paper : VI (Course No. 457)
|
Comprehensive Viva-voce
|
100
|
|
Subtotal
(Practical)
|
700
|
|
GRAND TOTAL
|
1200
|
|
ADMISSION NOTIFICATION (2007 – 2008)
FOR
FOUR SEMESTER M. TECH. COURSE IN TEXTILE TECHNOLOGY (TECHNICAL TEXTILES)
CONDUCTED AT
INSTITUTE OF JUTE TECHNOLOGY
UNDER THE UNIVERSITY OF CALCUTTA |
1. Name & Address of the Institute : Institute of Jute Technology, 35, Ballygunge Circular Road, Kolkata – 700 019 . Ph : (033) ) 2461-5444/ 2461-5477, Tele Fax : (033) 2461-5632,
E-mail : ijt@cal2.vsnl.net.in , ijtcomac@giascl01.vsnl.net.in ; Website : www.ijtindia.org
2.Status of the Institution : This is a Govt. grant in aided Institute under Jute Manufactures Development Council, Ministry of Textiles, Govt. of India. This Institute is also registered under Society Registration Act. 1961 as an autonomous educational Society.
3.No. of AICTE Approved Seats For M.Tech Course : 10 (General) Gate & Non-Gate +5 (Sponsored) + 3(SC/ST)
4. About the M. Tech. Course in Textile Technology (Technical Textiles) :This M Tech Course is specially designed to cover the advances in Textile Technology in general and the Technical Textiles in particular. The course contains eleven(11) theoretical papers of each 100 marks namely Advanced Engg, Math. & Statistics, Industrial Polymers & High Performance Fibers, Advances in Spinning & Technical Yarns, Advances in Weaving & Technical fabrics, Non-wovens ,Composites, Knitting , Textile Testing , Textile Structures and Analysis, Technical Textiles-I and II ( Packaging textiles, Geotextiles, Agro textiles, Sports textiles, Home textiles, Automotive textiles, Build-textiles, Protective textiles and Medical textiles etc.) , Production and Entreprenuership Management & Costing, Computer Applications, Clothing Science and Advances in Chemical Processing etc. along with six practical papers on Manufacture of technical yarns , technical fabrics and Fibre reinforced Composites etc. besides their physical and chemical analysis and testing as well as minor and major project work on specialized areas of technical textiles.
5. Eligibility for Admission:A candidate who has passed the B. Tech. examination in Jute and Fibre Technology or Fibre Technology (Jute) or Fibre Technology or B. Sc.Tech./ B. Tech. examination in Textile Technology of the University of Calcutta or Bachelor Degree in Textile Engineering/Textile Technology/Textile Chemistry of other recognized University or an equivalent examination recognized by the University of Calcutta will be eligible for admission to the Master of Technology (M. Tech.) course in Textile Technology (Technical Textiles).
6. About the Faculty : This Institute has well qualified and experienced Faculty and technical staff to cater the need of both theoretical and practical teaching in undergraduate and post graduate courses of this Institute under the University of Calcutta. Leading Scientists, academicians and experienced technologists of various reputed organizations are also invited to deliver lectures as Visiting Faculty.
7. About Library & Laboratory Infrastructure : This Institute has a well equipped library having more than 11,000 books and about 1200 back-volume journals with adequate library infrastructure facility for undergraduate and post graduate students. IJT currently procures 22 national journals and 11foreign journals each year.
8. Hostel Facility : No hostel facility is available at present. Guest house/Mess accommodations are available within 2-5 Km from the Institute at reasonable cost, however, the charges may vary from place to place.
9. Course Fees : Rs. 9,500/- per semester for GATE and NON-GATE students and Rs 12,500/-for sponsored students only.
10. Scholarship: No Scholarship is available from the Institute at present. However , GATE qualified candidates may obtain Scholarship directly from AICTE applying through proper channel only after the admission.
11. Admission Procedure : GATE qualified students will be preferred. Admission for all category of students will be made through an admission test and interview conducted by the Institute on 24.07.2007at 11.00 A M..
12.Important Dates :
Last Date of advertisement: 22-07-2007 in the Ananda Bazar Patrika and The Telegraph.
Last Date of submission of application form: 14. 08. 2007,
Date of Admission Test and Interview at 11 AM: 21.08.2007 at 11.00 A M.
Date of Admission: 24.08.2007
Commencement of the course: From Last week of August, 2007.
13. Application Form : The candidates are to apply in the prescribed format available from the IJT office / Course co-ordinators or may be downloaded from Institute website, WWW.ijtindia.org.
14. Requirements During Admission :a)Pass Certificate / Provisional certificate and/or Marksheet for B. Tech. (b) Madhyamik Certificate as proof of age (c) Medical Certificate for medical fitness (d) Cast Certificate for SC/ST candidate and (e)Transfer Certificate, if already admitted to other College,(f) If GATE qualified, Score card of GATE (g) If Sponsored, original letter of sponsorship (h) The course fee in full applicable for the 1st semester of the M Tech course is to be paid on the date of admission by a demand draft in favour of “Institute of Jute Technology” payable at Kolkata.
15.Contact Person :Prof. (Dr) Sadhan Chandra Ray / Prof. (Dr) A K Samanta , Course Co-co-ordinators , Institute of Jute Technology, Kolkata-700 019.
16.Copy Of Advertisement : A Copy of the advertisement published in the educational column of the Anandabazar Patrika and the telegraph dated 22-07-2007 is available below :
| Admission to M Tech In Textile Technology |
INSTITUTE OF JUTE TECHNOLOGY
35, Ballygunge Circular Road. Kolkata–700 019
Phone-033-2461-5444
Applications are invited for
admission to Four Semester M Tech Course in Textile Technology (Technical Textiles) under the University of Calcutta for 2007-08.
No. of Seats: 10 (General) +5(Sponsored)+3(SC/ST)
Eligibility: B Tech in Jute & Fibre / Textile Technology or equivalent. GATE qualified candidates will be preferred. Course Fees : Rs. 9,500/- per semester. Imporatant Dates: Last date of application: 14. 08. 2007, Date & time of admission test and interview : 21.08.2007 at 11.00 A M. , Last Date of admission : 24. 08. 2007.
Further details and admission form may be obtained from IJT office or may be down -loaded from the Institute website. www.ijtindia.org |
|
Schedule of Papers and Distribution of Marks
for
M.TECH. DEGREE COURSE IN TEXTILE TECHNOLOGY (TECHNICAL TEXTILES)
Under The University of Calcutta
To be Conducted at Institute of Jute Technology, Kolkata - 700
019
SEMESTER – I |
| Theoretical Papers |
| Paper no. & Code |
Subject |
Full Marks |
Contact Hours/week
(L - P) |
Paper : I
(Course No. MT511) |
Advanced Engineering Mathematics and Statistics
1st half : Engineering Mathematics & Numerical Analysis
2nd half : Industrial Statistics |
50
50 |
3-0
3-0 |
Paper : II
(Course No.MT512)
|
Industrial Polymers And High Performance Fibres
a) 1st Half: Industrial Polymers
b) 2nd Half: High Performance Fibres
|
50
50 |
3-0
3-0 |
Paper : III
(Course No.MT513)
|
Advances In Spinning & Technical Yarns
a) 1stHalf :Advances in Spinning
b) 2nd Half :Manufacture of Technical Yarns |
50
50 |
3-0
3-0 |
Paper : IV
(Course No.MT514)
|
Advances In Weaving & Technical Fabrics
a) 1st Half : Advances in Weaving
b) 2nd Half :Manufacture of Technical Fabrics
|
50
50 |
3-0
3-0 |
| Subtotal |
400 |
24-0 |
| Practical Papers |
Paper : V
(Course No.MT515)
|
Manufacturing of Technical Yarns & their Testing |
50 |
0 - 3 |
Paper : VI
(Course No.MT516)
|
Manufacturing of Technical Fabrics & their Testing |
50 |
0 - 3 |
| Subtotal (Practical) |
100 |
0 - 6 |
| TOTAL(Semester-I) |
500 |
24 - 6 |
|
| |
| SEMESTER – II |
| Theoretical Papers |
| Paper no. & Code |
Subject |
Full Marks |
Contact Hours/week
(L - P) |
Paper : I
(Course No.MT521) |
Coating, Lamination, Composites and Non-wovens
1st half : Coating, Lamination & Composites
2nd half : Non-woven Technology |
50
50 |
3-0
3-0 |
Paper : II
(Course No MT522) |
Knitting Technology & Structure & Analysis of Technical Textiles
1st half: Knitting Technology
2nd half : Structure & Analysis of Technical Textiles |
50
50 |
3-0
3-0 |
Paper : III
(Course No. MT523) |
Technical Textiles – I
1st half : Geo-textiles, Build-textiles & Agro-textiles
2nd half : Transport Textiles, Pack-textiles and Industrial Textiles. |
50
50 |
3-0
3-0 |
Paper : IV
(Course No. MT524) |
Entrepreneurship, Production Management, Costing & Financial Analysis
1st Half : Entrepreneurship & Production Management
2nd Half : Costing and Financial Analysis |
50
50 |
3-0
3-0 |
| Subtotal |
400 |
24-0 |
| Practical Papers |
Paper : V
(Course No. MT525) |
Manufacturing of Coated/Laminated Textiles & Composites & their testing |
50 |
0 - 3 |
Paper : VI
(Course No. MT526) |
Testing and Analysis of Polymers, Fibres, Composites and Technical Textiles. |
50 |
0 - 3 |
| Subtotal (Practical) |
100 |
0 - 6 |
| TOTAL(Semester-II) |
500 |
24 - 6 |
|
| |
| SEMESTER – III |
| Theoretical Papers |
| Paper no. & Code |
Subject |
Full Marks |
Contact Hours/week
(L - P) |
Paper : I
(Course No. MT611) |
Computer Programming and its application in Textiles
1st Half : Computer Structure and Programming
2nd Half : Application of Computer in Textiles |
50
50 |
3-0
3-0 |
Paper : II
(Coruse No. MT612) |
Clothing Science and Advances in Chemical Processing
1st Half : Clothing Science
2nd Half : Advances in Chemical Processing |
50
50 |
3-0
3-0 |
Paper : III
(Course No. MT613) |
Technical Textiles – II
1st half : Medical-textiles & Eco-textiles
2nd half : Protective-textiles and Home/Cloth/Sports textiles |
50
50 |
3-0
3-0 |
| Subtotal |
300 |
18-0 |
| Practical Papers |
Paper : IV
(Course No. MT614) |
Computer Programming and its Applications in Textiles |
50 |
0 - 3 |
Paper : V
(Course No. MT615) |
Chemical Processing & Functional Finishing |
50 |
0 - 3 |
Paper : VI
(Course No MT616) |
Minor Project Work |
100 |
0 - 6 |
| Subtotal (Practical) |
200 |
0 - 12 |
| TOTAL(Semester-III) |
500 |
18 - 12 |
|
| |
| SEMESTER – IV |
| Project Work, Seminar & Viva-Voce |
| Paper no. & Code |
Subject |
Full Marks |
Contact Hours/week
(L - P) |
Paper : I
(Course No. MT621) |
Major Project Work (Thesis)
a) Project Work & Report Writing
b) Project Seminar & Viva-Voce |
200
200 |
0-24 |
Paper : II
(Course No. MT622) |
Comprehensive Viva-Voce
|
100
|
-- |
| Subtotal (Practical & Viva) |
500 |
0-24 |
| TOTAL(Semester-IV) |
2500 |
0 - 24 |
| GRAND
TOTAL OF SEMESTER - I + SEMESTER - II + SEMESTER - III AND
SEMESTER - IV |
2000 |
66 - 48 |
|
| |
| Click
Here to Download M.Tech Application Form |
| |
|
|
|
|
Rules and Guidelines
for Admission to
Junior Level Supervisor's Certificate Course |
|
|
|
|
Courses
: Junior Level Supervisor's Course :
The short courses for the Junior Level Supervisors on (1) Spinning
and Spinning Preparatory and (2) Weaving and Weaving Preparatory
are due to commence from December 10, 2004 for 3 months. Each
candidate will be admitted to one course only i.e. either Spinning
or Weaving. The Spinning Course will cover Batching, Emulsion,
Softening, Carding, Drawing and Spinning. The Weaving Course
will cover Warp and Weft Winding, Size Preparation, Beaming,
Weaving, and Finishing. Both these courses will cover physical
and chemical testing of jute fibres, yarn and also statistical
quality control techniques.
Jute Mill Personal, who have completed at least 2 years in a
Jute Mill and have passed the School Final Examination, will
be eligible for admission to the Courses. Jute Mills are requested
to sponsor their candidates, who are to appear a Written
Test and an Interview in November this year. The time and date will be announced later.
The Application Forms should be forwarded through Chief Executive
or General Manager of the Jute Mill with an undertaking that
the Jute Mill will be providing jobs to the applicant after
completion of the course. No application will be entertained
without the valid sponsorship from the Jute Mills/Organizations.
Duration
The duration of the Course will be 3(three) months (the date will be announced later). These will be full-time
courses (From 11:00 A.M. to 5:00 P.M.).
Fees
A
consolidated fee of Rs. 4,000/- per student for each
course should be payable by way of Demand Draft in favor of
“Institute of Jute Technology”.
Both
these courses will be covering physical and chemical testing of jute
fibers, yarn and fabrics and also statistical quality control techniques.
Hostel
There is no provision for Hostel accommodation and the
students will have to make their own arrangement for boarding
and lodging. But the Foreign Nationals will be accommodate in a nearby Guest House and the students have to bear their boarding and lodging expenses. The Canteen service of the Institute will, however,
be available for mid-day snacks and tea.
Last
Date
Completed Application Forms along with attested Mark sheets,
Certificates, etc. should reach the Office of the Institute.
The date and time will be announced later.
Application Forms will be available in the Account Department
of the Institute against the sponsorship letter from
the Mills, between 11:00 A.M. and 1:15
P.M. and 2:00 P.M. and 3:00 P.M. on payment of Rs.
50/- (Rupees Fifty). The date and time will be announced later.
|
|
|
|
|
Schedule of Syllabus of Junior Level Supervisors' Course
1. JUTE SPINNING AND SPINNING PREPARATORY - 3 MONTHS
PAPER - I Jute Spinning and Spinning
Preparatory - 100 Marks
PAPER - II a) Elements of Engineering
& Maintenance - 50 Marks
b) Elements of Statistics & Textile Testing - 50 Marks
2. JUTE WEAVING AND WEAVING PREPARATORY
PAPER - I Jute Weaving and Waving
Preparatory - 100 Marks
PAPER - II a) Elements of Engineering
& Maintenance - 50 Marks
b) Elements of Statistics & Textile Testing - 50 Marks
|
|
|
| |
| ADMISSION
OF FOREGIN STUDENTS
|
| |
All India Council for Technical Education vide its approval No. F. No.750-80-106(E) / ET / 95 Dated 25.08.2004 has sanctioned 15% of intake capacity (30) for admitting foreign nationals in B. Tech. Degree Course. In accordance with this order the Institute will admit 5 foreign nationals. Applications are invited from foreign students for admission to AICTE approved 4-year B.Tech in Jute and Fibre Technology under the University of Calcutta . Candidates who passed with at least 45% marks in Physics, Chemistry and Mathematics in Class XII Examination as prevailed for the Indian Nationals. Apart from the B.Tech Degree Course Institute is conducting 3 months Certificate Course for mill sponsored Junior Level Supervisors (JLS). Foreign National may apply for the same.
Selection of candidates will be done on merit basis. Medium of instruction is English. Tuition fees will be US$ 3000 per year for B.Tech course and US$ 150 for Certificate Course. As there is no hostel, students will be accommodated in a Guest House. Boarding and Lodging charges should be bourne by individual students.
Candidates has to apply in a plain paper mentioning the permanent address and address for communication will attested photocopies for proof of marks, Passport No. and Validity along with equivalent certificate from the Attach (Education) of High Commission of India in respective Country.
Applications with complete paper must reach the Institute by 31st July 2005. Candidates may visit the Institute Web site for details www.ijtindia.org .
Attention:-
Admission date has been extended upto 31st July 2006
|
-Principal
|
|
| |
OTHER COURSES ·
*Jute
Industry and Institute of Jute Technology Interaction all under
the IIPC scheme
of AICTE.
*Refresher Short Courses
for Supervisors and Managers in the premises of Jute Mill. ·
* Workers' Training ·
* Refresher short courses for Supervisory Training at Institute
:
a) Testing and Quality Control
b) Skill Development for Artisan & Entrepreneurs
c) Training on Jute-based Handicraft, Soft Luggage, Dyeing/Bleaching
etc. for Decentralised Sector. 5.0.
|
|
|
Home
| About Us | Activities| Library | Laboratories
| Faculty | Members
| Course Details| Contact
us | Testing & Inspection
|
